PalmControl TrueCenter®
CamLock® Vise
Smooth and Accurate
Locating Vise
Keep your engraving location in view and centered.
Made in Nebraska, USA!
PalmControl
TrueCenter CamLock
Features a solid stainless steel slide plate that is hardened to 58RC for
a lifetime of durability! The jaws
incorporate threaded holes in the tops and faces for
customization. For example: the multi-coin jaws
will screw to the jaws, or another example: make yourself wood
jaws with leather faces to screw to the top for holding knives..etc. Included
with the vise is a Self-Holding
T-Wrench, Allen wrench and10 pins. 12.5 lbs.
PalmControl CamLock Vise Complete and with
Self-Holding T-Wrench, Allen wrench and 10 pins
Self-Holding T Wrench for PC Vise, and PC CamLock vise.
(wrench only) $46.00
Round Brass Knurl Wrench for PC Vise, and PC CamLock
vise. (wrench only) $24.00
CamLock Jaw accessories
These will fit
either of the two sizes of CamLock vise jaws (Goliath and
PalmControl CamLock). Scroll down to see examples of
accessories installed.
CamLock Vise jaw
plates and accessories
as pictured above with six finger Cosmos collet $135
CamLock Vise jaw
plates and accessories
as pictured above with twelve finger Cosmos collet $147
Purchase
separately
Jaw Plate A $41
Jaw Plate B $38
Centers Long $14
Centers Short $12
Cosmos Collet brass 6 fingers $25
Cosmos Collet brass 12 fingers $35
Nylon Washers $3
.gif){kind=small}
