Note:
In the photo above the written weights of the two small heads
are not correct. The small head with small face
back end is 20grams, and the small head with ball back end is
17.5grams. The 38 gram larger head is correct. These are the
weights of the heads only. No handle.
These
chasing hammer heads and handles are artfully designed.
Hammer heads and handles are sold assembled, as well as
separately. The heads are turned from S7 tool steel and hardened to
58RC. The
handle is balanced for chasing work and is designed to flex
slightly during use. When the handles were made from
wood this thin, the amount of flex was unpredictable from one
to another. There was also the risk of breakage.
These handles made from composite provide a cross between
predicable minimal flex as well as strength for years of use.
Currently available in two weights 28gram (1.0 oz) and 38
grams (1.4oz). The 28gram (1.0oz) head is available with
a ball back end or with a small face back end
Referring to the
above photo for options:
| A: 17.5 grams
(0.62 oz) - ball back end- hardened 58RC - left straw color
after tempering $78 |
 |
| B: 17.5 grams
(0.62 oz) - ball back end- hardened 58RC - polished after
tempering $89 |
|
| C: 20 grams
(0.7 oz) - small face back end - hardened 58RC - left straw
color after tempering $78 |
|
| D: 20 grams
(0.7 oz) - small face back end - hardened 58RC - polished
after tempering $89 |
|
| E: 38 grams
(1.4oz) - small face back end - hardened 58RC - left straw
color after tempering $78 |
|
| F: 38 grams
(1.4oz) - small face back end - hardened 58RC - polished
after tempering $89 |
|
Any of
the heads can be sold separate from the handle ($15 less).
To order a head without a handle use the above "add to cart"
buttons and when checking out write a note in the place
provided that you would only like the head. We will
refund you $15 for the handle and only ship the head. Or
if you like to order the head with the handle but not have
them secured together, then write a note during the checkout
letting us know.
Handle
only- $15.00
(This can be used for a handle if you'd like to make your own
head)
Engraveable heads - These heads are made
from 416 stainless and can be engraved. If you'd like to
engrave a hammer head 416 stainless at 25Rc to 30Rc cuts and
engraves easily. They come polished and ready for engraving.
If however you hammer with the head the 416 stainless can dent.
They are shipped without a handle. If you'd like a handle
for them order it above. Handles are $15.
(head at left in photo)
416 stainless 38 gram (1.4 oz) with small face back end -
$68 Coming soon
(head in center in photo)
416 stainless 20 gram (0.7 oz) with small face back end -
$68
(head at right in photo)
416 stainless 17.5 gram (0.62 oz) with ball back end -
$68
|
